 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) TN16 and TYNx16 Series 16A SCRs STANDARD MAIN FEATURES: Symbol IT(RMS) VDRM/VRRM IGT Value 16 600 to 1000 25 Unit G A A K V mA A A KA DESCRIPTION The TYN / TN16 SCR Series is suitable for general purpose applications. Using clip assembly technology, they provide a superior performance in surge current capabilities. G K 2 A D PAK (TN16-G) G TO-220AB (TYN) ABSOLUTE RATINGS (limiting values) Symbol IT(RMS) T(AV) ITSM Parameter RMS on-state current (180 conduction angle) Average on-state current (180 conduction angle) Non repetitive surge peak on-state current It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range Maximum peak reverse gate voltage tp = 8.3 ms Tj = 25C tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s Tj = 25C Tj = 125C Tj = 125C Tj = 125C 190 180 50 4 1 - 40 to + 150 - 40 to + 125 5 A2S A/s A W C V Tc = 110C Tc = 110C Value 16 10 200 A Unit A A I t dI/dt IGM PG(AV) Tstg Tj VRGM April 2002 - Ed: 4A 1/7 TN16 and TYNx16 Series ELECTRICAL CHARACTERISTICS (Tj = 25C, unless otherwise specified) Symbol IGT VD = 12 V VGT VGD IH IL dV/dt VTM Vt0 Rd IDRM IRRM VD = VDRM RL = 3.3 k IT = 500 mA IG = 1.2 x IGT VD = 67 % VDRM Gate open ITM = 32 A tp = 380 s Tj = 125C Tj = 25C Tj = 125C Tj = 125C Tj = 25C VDRM = VRRM Tj = 125C Gate open Tj = 125C RL = 33 Test Conditions MIN. MAX. MAX. MIN. MAX. MAX. MIN. MAX. MAX. MAX. MAX. Value 2 25 1.3 0.2 40 60 500 1.6 0.77 23 5 2 Unit mA V V mA mA V/s V V m A mA Threshold voltage Dynamic resistance THERMAL RESISTANCES Symbol Rth(j-c) Rth(j-a) Junction to case (DC) Junction to ambient (DC) S = 1 cm S = Copper surface under tab Parameter Value 1.1 TO-220AB D PAK Unit C/W C/W 60 45 PRODUCT SELECTOR Voltage (xxx) Part Number 600 V TN1625-xxxG TYNx16 X X 800 V X X 1000 V X X 25 mA 25 mA DPAK TO-220AB Sensitivity Package 2/7 TN16 and TYNx16 Series ORDERING INFORMATION TN STANDARD SCR SERIES CURRENT: 16A 16 25 - 600 G (-TR) PACKAGE: 2 G: D PAK PACKING MODE: Blank: Tube -TR: Tape & Reel SENSITIVITY: 25: 25mA VOLTAGE: 600: 600V 800: 800V 1000: 1000V TYN STANDARD SCR SERIES 6 VOLTAGE: 6: 600V 8: 800V 10: 1000V 16 (RG) PACKING MODE Blank: Bulk RG: Tube CURRENT: 16A OTHER INFORMATION Part Number TN1625-x00G TN1625-x00G-TR TYNx16 TYNx16RG Note: x = voltage Marking TN1625x00G TN1625x00G TYNx16 TYNx16 Weight 1.5 g 1.5 g 2.3 g 2.3 g Base Quantity 50 1000 250 50 Packing mode Tube Tape & reel Bulk Tube 3/7 TN16 and TYNx16 Series Fig. 1: Maximum average power dissipation versus average on-state current. P(W) 16 14 12 10 8 6 4 2 0 0 2 4 IT(av)(A) 6 8 360 Fig. 2-1: Average and D.C. on-state current versus case temperature. IT(av)(A) 18 16 14 12 10 8 6 4 2 0 D.C. = 180 =180 Tcase(C) 0 25 50 75 100 125 10 12 Fig. 2-2: Average and D.C. on-state current versus ambient temperature (copper surface under tab: S = 1 cm (for DPAK). IT(av)(A) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 Tamb(C) 50 75 100 125 = 180 D.C. Fig. 3: Relative variation of thermal impedance versus pulse duration. K = [Zth/Rth] 1.00 Zth(j-c) 0.10 Zth(j-a) tp(s) 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature. IGT,IH,IL [Tj] / IGR,IH,IL [Tj = 25 C] 2.5 2.0 IGT Fig. 5: Surge peak on-state current versus number of cycles. ITSM(A) 200 180 160 140 120 100 80 60 40 20 0 tp = 10ms Non repetitiv e Tj initial = 25 C Repetitive Tcase = 110 C One cycle 1.5 1.0 0.5 Tj(C) 0.0 -40 -20 0 20 40 60 80 100 120 140 IH & IL Number of cycles 1 10 100 1000 4/7 TN16 and TYNx16 Series Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding value of It. ITSM(A),I 2t(A2s) 2000 1000 ITSM Fig. 7: values). On-state characteristics (maximum ITM(A) 200 Tj initial = 25 C 100 Tj max.: Vto = 0.77V Rd = 23m dI/dt limitattion Tj = Tjmax. 100 It 2 10 Tj = 25C tp(ms) 10 0.01 0.10 1.00 10.00 VTM(V) 1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Fig. 8: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35 m) (for DPAK). Rth(j-a) ( C/W) 80 70 60 50 40 30 20 10 0 0 4 8 12 16 S (cm 2) 20 24 28 32 36 40 5/7 TN16 and TYNx16 Series PACKAGE MECHANICAL DATA DPAK (Plastic) DIMENSIONS A E L2 C2 REF. Millimeters Min. Typ. Max. 4.60 2.69 0.23 0.93 Min. Inches Typ. Max. D L L3 A1 B2 B G A2 2.0 MIN. FLAT ZONE V2 C R A A1 A2 B B2 C C2 D E G L L2 L3 R V2 4.30 2.49 0.03 0.70 1.25 0.45 1.21 8.95 10.00 4.88 15.00 1.27 1.40 0 1.40 0.40 0.169 0.181 0.098 0.106 0.001 0.009 0.027 0.037 0.048 0.055 0.60 0.017 0.024 1.36 0.047 0.054 9.35 0.352 0.368 10.28 0.393 0.405 5.28 0.192 0.208 15.85 0.590 0.624 1.40 0.050 0.055 1.75 0.055 0.069 0.016 8 0 8 FOOTPRINT DIMENSIONS (in millimeters) DPAK (Plastic) 16.90 10.30 1.30 5.08 3.70 8.90 6/7 TN16 and TYNx16 Series PACKAGE MECHANICAL DATA TO-220AB (Plastic) DIMENSIONS B REF. C Millimeters Min. Typ. 3.75 Max. Min. Inches Typ. 0.147 Max. 0.625 b2 L F I A l4 a1 c2 l3 l2 a2 b1 e M c1 A a1 a2 B b1 b2 C c1 c2 e F I I4 L l2 l3 M 15.20 15.90 0.598 13.00 14.00 0.511 0.551 10.00 10.40 0.393 0.409 0.61 0.88 0.024 0.034 1.23 1.32 0.048 0.051 4.40 4.60 0.173 0.181 0.49 0.70 0.019 0.027 2.40 2.72 0.094 0.107 2.40 2.70 0.094 0.106 6.20 6.60 0.244 0.259 3.75 3.85 0.147 0.151 15.80 16.40 16.80 0.622 0.646 0.661 2.65 2.95 0.104 0.116 1.14 1.70 0.044 0.066 1.14 1.70 0.044 0.066 2.60 0.102 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Isreal - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7 |
Price & Availability of TYN416
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |